![]() Use 1/4" size flat head screw driver to widen or fix bent prongs on ATX Pin Removal Tool and Pin Extractor. DTM, DTV, DRB, DRCP and STRIKE connectors Molex Crimping Tool,knoweasy 1424A 24-14 Awg. Push the two prongs of the ATX Pin Extractor Tool as far as you can into the Motherboard 24 pin connector, then you can remove the cable wire. Metri-pack Connectors Removal Tool Connector Crimp Pin Etc. Remember in previous steps with 4 pin connector, the two tool prongs must be opposite sides of the pin. Gently push the two prongs of the ATX Pin Extractor Tool into the Motherboard 24 pin connector. Use same method as shown with 4 pin connector above to remove motherboard connector pin with this ATX Pin Extractor Tool. This ATX Pin Removal Hand Tool can also be used for removing pins in 4 pin, 6 pin, 8 pin, and 24 pin motherboard computer power connectors, Remember previous step, tool prongs must be opposite sides of the pin. Gently push the two prongs of the ATX Pin Extractor Tool into the connector. ![]() The two prongs on ATX Pin Extractor Tool must be inserted on opposite side left and right side of the pin. This ATX Pin Removal Tool can be used to remove power cable connection pins from motherboard 24 pin connector, 8 pin connector, 6 pin connector, and 4 pin connector. NO RETURNS ACCEPTED ON THIS ITEM (This is due to customers improperly using the tool and bending the ends when removing 24 pin connections).If you haven't used an ATX pin extraction tool like this before, please be aware that it may take some practice. You should not have to push hard on the tool, and this can cause the prongs to bend. The prongs can be bent if used incorrectly. ![]()
0 Comments
Leave a Reply. |